ATC México 2022

Agosto 23-24, 2022
Evento Virtual Sin Costo

  • Days
  • Hours
  • Minutes
  • Seconds
August 23, 2022 10:00:00

El evento más importante sobre la convergencia entre simulación, la Inteligencia Artificial y HPC para el diseño de productos en Latinoamérica

El ATC México regresa en esta su 9a edición con importantes  presentaciones de líderes de opinión y expertos en las soluciones de Altair y las últimas tendencias de la industria.

Descubre cómo la convergencia entre el diseño impulsado por simulación, la llegada del Big Data y la inclusión de la Inteligencia Artificial en diseño, acelera la innovación y facilita la toma de decisiones en las empresas alrededor del mundo.

Dos días de ponencias en vivo, paneles de discusión con expertos de la industria y contenido innovador para los asistentes de Latinoamérica.

*Presentaciones en español*

Algunos presentadores anteriores

Clientes nacionales e internacionales de diferentes industrias han presentado en el Altair Technology Conference México. Únete a esta edición y descubre cómo Mabe, GE, Ford, Cuprum y más empresas innovadoras han potenciado la innovación en sus equipos con la tecnología de Altair.

**Asiste al evento en vivo y podrás tener la oportunidad de  ganar tarjetas de regalo electrónicas y promocionales de Altair**

Expositores

Ottmar Kappes
Ottmar Kappes Altair Country Manager
Fatma Kocer
Fatma Kocer Altair VP Engineering Data Science
Jason Napolitano
Jason Napolitano Altair Americas Senior Vicepresident
Jim Ryan
Jim Ryan Altair VP, Solutions Development
Martin Ortega
Martin Ortega Mabe Líder de Diseño
Jonathan Armas
Jonathan Armas Ford Chassis Virtual CAE & Optimization Engineer
Juan Antonio Barajas Liñan
Juan Antonio Barajas Liñan Cuprum Diseño de Dados
Rick Watkins
Rick Watkins Altair Director Appliances Business Development
Dave Jacobson
Dave Jacobson Lambda Research Corporation Senior Application Engineer
Yussef Nesme
Yussef Nesme DRIVEN/ CLAUT Innovation Center CAE Product Simulation Leader
Daniel Rivera
Daniel Rivera Altair Application Engineer - Electronics
Javier Gutiérrez Diez
Javier Gutiérrez Diez IDIADA Product Coordinator, Digital Business - Digital Environments
Ottmar Kappes
Ottmar Kappes Altair Country Manager
Fatma Kocer
Fatma Kocer Altair VP Engineering Data Science
Jason Napolitano
Jason Napolitano Altair Americas Senior Vicepresident
Jim Ryan
Jim Ryan Altair VP, Solutions Development
Martin Ortega
Martin Ortega Mabe Líder de Diseño
Jonathan Armas
Jonathan Armas Ford Chassis Virtual CAE & Optimization Engineer
Juan Antonio Barajas Liñan
Juan Antonio Barajas Liñan Cuprum Diseño de Dados
Rick Watkins
Rick Watkins Altair Director Appliances Business Development
Dave Jacobson
Dave Jacobson Lambda Research Corporation Senior Application Engineer
Yussef Nesme
Yussef Nesme DRIVEN/ CLAUT Innovation Center CAE Product Simulation Leader
Daniel Rivera
Daniel Rivera Altair Application Engineer - Electronics
Javier Gutiérrez Diez
Javier Gutiérrez Diez IDIADA Product Coordinator, Digital Business - Digital Environments

Agenda

Día 1 Agosto 23, 2022
Escenario principal
10:00 am CDT

Bienvenida

Ottmar Kappes - Altair

10:05 am CDT

Digital Transformation and Convergence

Jason Napolitano - Altair

10:30 am CDT

Evolución del desarrollo de producto integrando nuevas tecnologías

Martin Ortega - Mabe

10:50 am CDT

How Does Data Science Help to Product Design?

Fatma Kocer - Altair

11:10 am CDT

Break

11:15 am CDT

Enabling Complete Digital Twins by Converging Engineering Simulation and Data Science

Jim Ryan - Altair

11:35 am CDT

Rick Watkins - Altair

12:00 pm CDT

Panel con expertos del Día 1

Moderador: Jim Ryan con la participación de: Fatma Kocer, Martín Ortega y Rick Watkins

Día 2 Agosto 24, 2022
Escenario principal
10:00 am CDT

Bienvenida

Amara Regalado - Altair

Presentaciones de Clientes y Altair Partner Alliance :

10:05 am CDT

Preliminary design evaluation of complex systems in aviation using Altair SimSolid

Luis Vidriales - GE

Select boundary hardware that is going to be included in HFC analysis, is a critical step that normally relies on analyst experience. There are internal practices widely accepted to do so but having more accurate prediction of natural frequencies  while including more components in more complex layout, have been found to be helpful to take important decisions towards a more accurate FEA. Altair SimSolid was used to evaluate natural frequencies on a complex system which contained a potential redesign in ... Read More

10:30 am CDT

Stone Pecking for Underbody components with EDEM

Jonathan Armas - Ford

Stone pecking is the repetitive rock collision caused by the road conditions, especially for gravel and dust, this collisions or impacts can be observed throughout the vehicle underbody components and result in progressive damage. This work is about the stone pecking and how the rock impacts degrade the underbody components. Altair EDEM software was employed to simulate and analyze events such as rocks impact and wear location, demonstrating the ability of the software to easily model and simulate complex phenomena ... Read More

10:50 am CDT

Boosting Electronics Reliability with Simulation Driven Design

Daniel Rivera - Altair

As electronic designs become more complex, ensuring system reliability is an increasing challenge. Altair offers a suite of products to simulate the performance of electronic systems at all levels, enabling improved reliability in fewer design iterations.

11:15 am CDT

Break

11:20 am CDT

Maximizando la rentabilidad del proceso de extrusión mediante la simulación de matrices

Juan Antonio Barajas - Grupo CUPRUM

11:40 am CDT

Validación de rampas de emergencia mediante simulación MBD-DEM

Yussef Nesme - Driven-CLAUT

12:00 pm CDT

Reduce Time and Cost of Light Guide Designs with Virtual Prototyping

Dave Jacobsen - Lambda Research Corporation

12:20

Enhance Vehicle Performance Simulation with Digitalized Road Data

Javier Gutiérrez Diez -IDIADA

Día 1 Agosto 23, 2022
Día 2 Agosto 24, 2022
Escenario principal
Escenario principal
10:00 am CDT

Bienvenida

Ottmar Kappes - Altair

10:05 am CDT

Digital Transformation and Convergence

Jason Napolitano - Altair

10:30 am CDT

Evolución del desarrollo de producto integrando nuevas tecnologías

Martin Ortega - Mabe

10:50 am CDT

How Does Data Science Help to Product Design?

Fatma Kocer - Altair

11:10 am CDT

Break

11:15 am CDT

Enabling Complete Digital Twins by Converging Engineering Simulation and Data Science

Jim Ryan - Altair

11:35 am CDT

Rick Watkins - Altair

12:00 pm CDT

Panel con expertos del Día 1

Moderador: Jim Ryan con la participación de: Fatma Kocer, Martín Ortega y Rick Watkins

10:00 am CDT

Bienvenida

Amara Regalado - Altair

Presentaciones de Clientes y Altair Partner Alliance :

10:05 am CDT

Preliminary design evaluation of complex systems in aviation using Altair SimSolid

Luis Vidriales - GE

Select boundary hardware that is going to be included in HFC analysis, is a critical step that normally relies on analyst experience. There are internal practices widely accepted to do so but having more accurate prediction of natural frequencies  while including more components in more complex layout, have been found to be helpful to take important decisions towards a more accurate FEA. Altair SimSolid was used to evaluate natural frequencies on a complex system which contained a potential redesign in ... Read More

10:30 am CDT

Stone Pecking for Underbody components with EDEM

Jonathan Armas - Ford

Stone pecking is the repetitive rock collision caused by the road conditions, especially for gravel and dust, this collisions or impacts can be observed throughout the vehicle underbody components and result in progressive damage. This work is about the stone pecking and how the rock impacts degrade the underbody components. Altair EDEM software was employed to simulate and analyze events such as rocks impact and wear location, demonstrating the ability of the software to easily model and simulate complex phenomena ... Read More

10:50 am CDT

Boosting Electronics Reliability with Simulation Driven Design

Daniel Rivera - Altair

As electronic designs become more complex, ensuring system reliability is an increasing challenge. Altair offers a suite of products to simulate the performance of electronic systems at all levels, enabling improved reliability in fewer design iterations.

11:15 am CDT

Break

11:20 am CDT

Maximizando la rentabilidad del proceso de extrusión mediante la simulación de matrices

Juan Antonio Barajas - Grupo CUPRUM

11:40 am CDT

Validación de rampas de emergencia mediante simulación MBD-DEM

Yussef Nesme - Driven-CLAUT

12:00 pm CDT

Reduce Time and Cost of Light Guide Designs with Virtual Prototyping

Dave Jacobsen - Lambda Research Corporation

12:20

Enhance Vehicle Performance Simulation with Digitalized Road Data

Javier Gutiérrez Diez -IDIADA

Lo que opinan nuestros asistentes

"Excelente foro para enriquecer conocimiento en los temas que lideran en la industria de la simulación, y su aplicación con productos de Altair."

Kristian Flores
IPTSE Mounts CAE Engineer

“El ATC México es un excelente evento para conocer de las últimas novedades de aplicaciones en ingeniería, así mismo es buen lugar para conocer usuarios y lo que hacen en la industria”

Pedro Orta
Profesor Ingeniería

“Gran oportunidad para conocer cómo los productos de Altair son utilizados por los expertos en la industria. Excelente ocasión para intercambiar puntos de vista con los protagonistas de la ingeniería de nuestros días.”

Asahel Mendoza
Chassis CAE Engineer

¡Reserva tu lugar!

¡Únete al ATC México 2022!

Regístrate