schneller Simulieren als Konstruieren

Risiko und Kosten später Konstruktions- und Produktänderungen vermeiden
KMU Konferenz | 28. Juni 2023

  • Days
  • Hours
  • Minutes
  • Seconds
Juni 28, 2023 10:30:00

Schneller Simulieren als Konstruieren

Wenn Simulationstechnologien wie CAE oder FEM frühzeitig im Entwicklungszyklus eingesetzt werden, können sie die Produktentwicklung beschleunigen. Wir wissen jedoch, wie schwierig es ist, die richtige Simulationslösung auszuwählen und sie effektiv zu implementieren, wenn Sie nur über begrenzte Ressourcen verfügen.

Sie denken darüber nach, FEM-Simulation einzuführen? Sie nutzen bereits in Ihrem CAD-System integrierte Simulationswerkzeuge, haben jedoch Probleme mit der Modellbildung, Berechnungsdauer und Genauigkeit? Sie möchten Ihr Produkt vollständig abbilden und multiphysikalische Effekte simulieren? Nehmen Sie an unserem kostenlosen virtuellen Event am 28. Juni 2023 teil und erfahren Sie von Anwendern und Altair Experten, wie eine Mischung aus Software, Support und Know-how Ihnen hilft, effizienter und effektiver Produkte zu entwickeln.

Warum sollten Sie teilnehmen?

Erfahren Sie, wie mittelständische Unternehmen mit den CAE Simulationslösungen Altair® Inspire™, SimSolid®, SimLab® das Risiko und die Kosten von späten Konstruktions- und Produktänderungen reduzieren.

Unsere Themen:

  • Mittelständische Altair Kunden und Altair Channel Partner präsentieren Beispiele, wie sie die Grenzen von CAD-integrierter Simulation überwunden und mit einem simulationsgetriebenen Innovationsprozess Ihre Produktentwicklung erfolgreich beschleunigt haben.
  • Generatives Design, Konzeptentwicklung, Topologieoptimierung und fertigungsgerechte Konstruktion in Altair® Inspire™..
  • Schnelle Strukturanalyse in Altair SimSolid® für komplexe Geometrien und große Baugruppen.
  • Falltests, thermische, CFD-, Ermüdungs- oder kombinierte Multiphysik-Analyse in Altair® SimLab®.
  • Fertigungsmöglichkeiten, Prozesssimulation mit Inspire Cast, Inspire Form, Inspire Mold oder Inspire Print3D.

Die Präsentationen werden simultan ins Englische, Französische, Deutsche, Spanische, Italienische, Portugiesische, Japanische, Chinesische und Koreanische übersetzt.

Wer sollte teilnehmen?

  • Konstrukteure, Ingenieure, Konstruktionsleiter.
  • 3D-CAD Anwender, die mit der Simulation beginnen möchten.
  • Alle die an die Grenzen ihrer CAD-integrierten Simulationslösung stoßen und schneller genauere Ergebnisse benötigen.
  • CAE-Ingenieure, Berechner und Berechnungsleiter.
  • Wenn Sie Ihr Produkt vollständig abbilden möchten mit Hilfe von Multiphysik-Analysen.
  • Manager verwandter Abteilungen, die auf die CAE-Abteilung angewiesen oder Simulationsdienste auslagern und zu lange auf Ergebnisse warten müssen.

Speakers

Antti Mäntylä
Antti Mäntylä Senior Expert Wärtsilä Finland
Marques Felipe
Marques Felipe CEO BioArchitects
Michael Larner
Michael Larner Research Director ABI Research
Ranjit R
Ranjit R Sr. Engineer Mcwane India Pvt Ltd.
Shreesha M
Shreesha M Propulsion Engineer Skyroot Aerospace, India
Shantaram Jadhav
Shantaram Jadhav Senior Principal Lead UNO Minda Ltd.
Jay Weiner
Jay Weiner Founder BiggerBoat Solutions Ltd.
Poonam Gurav
Poonam Gurav CAE Staff Engineer UNO Minda Ltd.
Vidyapraksh G S
Vidyapraksh G S Lead CAE Lakshmi Machine Works Ltd.
Bruno Mollon
Bruno Mollon Engineer Suspensys, Brazil
Ravi Karjatkar
Ravi Karjatkar Director Operations/ Technical Director Linit Exports Pvt Ltd - Foundry Division
Pravin Dileep Nawale
Pravin Dileep Nawale Design Engineer Mungi Engineers Pvt. Ltd.
Suresh N
Suresh N Deputy Manager- FEA & R&D for Structural Durability Simulation Sharda Motor Industries Ltd. R&D
Abhishek Thakur
Abhishek Thakur Senior Design Engineer U-Shin India Private Ltd., India
Li Zhe Khor
Li Zhe Khor Material Engineer Keysight Technologies, Malaysia
Azri Rahimi
Azri Rahimi Postgraduate Researcher Universiti Teknologi MARA (UiTM)
Yupiter HP Manurung
Yupiter HP Manurung Professor Universiti Teknologi MARA (UiTM)
Dr. Shayne Hsu
Dr. Shayne Hsu Associate Manager Hon-Hai Technology Group (Foxconn)
Joe Chia-Chin Wu
Joe Chia-Chin Wu Assistant Professor National Kaohsiung University of Science and Technology (NKUST), Greater China
Kim Sungeun
Kim Sungeun Senior Researcher Donghee, Korea
Kim Seungtae
Kim Seungtae CAE Team Leader Kwangjin, Korea
Rainer Böke
Rainer Böke Managing Director Böke-IE GmbH & Co. KG
Yan Pugh-Jones
Yan Pugh-Jones Engineering Director Brompton Bicycle
Steven Harry
Steven Harry Lead Structural Engineer Brompton Bicycle
Mike Harper
Mike Harper Director Skaigh Engineering
Ravi Kunju
Ravi Kunju Chief Product and Strategy Officer Altair
Guna Krishna
Guna Krishna Sr. Vice President, SimLab Development Altair
Girish Mudigonda
Girish Mudigonda Product Manager, SimSolid Altair
Pavan Kumar
Pavan Kumar SVP, Global Indirect Business Altair
Tony Gray
Tony Gray Technical Director Altair
Antti Mäntylä
Antti Mäntylä Senior Expert Wärtsilä Finland
Marques Felipe
Marques Felipe CEO BioArchitects
Michael Larner
Michael Larner Research Director ABI Research
Ranjit R
Ranjit R Sr. Engineer Mcwane India Pvt Ltd.
Shreesha M
Shreesha M Propulsion Engineer Skyroot Aerospace, India
Shantaram Jadhav
Shantaram Jadhav Senior Principal Lead UNO Minda Ltd.
Jay Weiner
Jay Weiner Founder BiggerBoat Solutions Ltd.
Poonam Gurav
Poonam Gurav CAE Staff Engineer UNO Minda Ltd.
Vidyapraksh G S
Vidyapraksh G S Lead CAE Lakshmi Machine Works Ltd.
Bruno Mollon
Bruno Mollon Engineer Suspensys, Brazil
Ravi Karjatkar
Ravi Karjatkar Director Operations/ Technical Director Linit Exports Pvt Ltd - Foundry Division
Pravin Dileep Nawale
Pravin Dileep Nawale Design Engineer Mungi Engineers Pvt. Ltd.
Suresh N
Suresh N Deputy Manager- FEA & R&D for Structural Durability Simulation Sharda Motor Industries Ltd. R&D
Abhishek Thakur
Abhishek Thakur Senior Design Engineer U-Shin India Private Ltd., India
Li Zhe Khor
Li Zhe Khor Material Engineer Keysight Technologies, Malaysia
Azri Rahimi
Azri Rahimi Postgraduate Researcher Universiti Teknologi MARA (UiTM)
Yupiter HP Manurung
Yupiter HP Manurung Professor Universiti Teknologi MARA (UiTM)
Dr. Shayne Hsu
Dr. Shayne Hsu Associate Manager Hon-Hai Technology Group (Foxconn)
Joe Chia-Chin Wu
Joe Chia-Chin Wu Assistant Professor National Kaohsiung University of Science and Technology (NKUST), Greater China
Kim Sungeun
Kim Sungeun Senior Researcher Donghee, Korea
Kim Seungtae
Kim Seungtae CAE Team Leader Kwangjin, Korea
Rainer Böke
Rainer Böke Managing Director Böke-IE GmbH & Co. KG
Yan Pugh-Jones
Yan Pugh-Jones Engineering Director Brompton Bicycle
Steven Harry
Steven Harry Lead Structural Engineer Brompton Bicycle
Mike Harper
Mike Harper Director Skaigh Engineering
Ravi Kunju
Ravi Kunju Chief Product and Strategy Officer Altair
Guna Krishna
Guna Krishna Sr. Vice President, SimLab Development Altair
Girish Mudigonda
Girish Mudigonda Product Manager, SimSolid Altair
Pavan Kumar
Pavan Kumar SVP, Global Indirect Business Altair
Tony Gray
Tony Gray Technical Director Altair

AGENDA

APAC JST 13:30 | MYT 12:30 | IST 10:00
Keynotes
13:30 JST | 12:30 MYT | 10:00 IST

Welcome & Introduction Altair

Pavan Kumar - SVP, Global Indirect Business - Altair

13:35 JST | 12:35 MYT | 10:05 IST

Altair Keynote - Simulation at the Speed of Design

Ravi Kunju - Chief Product and Strategy Officer - Altair

13:50 JST | 12:50 MYT | 10:20 IST

Simulation's Role in Developing the Lightweight, All Titanium Brompton

Yan Pugh-Jones - Engineering Director - Brompton Bicycle
Steven Harry - Lead Structural Engineer - Brompton Bicycle

14:05 JST | 13:05 MYT | 10:35 IST

FireChat: SMB's Challenges to Adopting Simulation-Driven Design

Michael Larner - Research Director - ABI Research

Moderator: Ujwal Patnaik – Director, Product Strategy – Altair

14:25 JST | 13:25 MYT | 10:55 IST

Live Q&A

Simulation Starters

Simulation Starters - Everyone Can Simulate

A session designed for those who do not currently use simulation technologies, are outsourcing most/all of their analysis, or still use limited CAD embedded simulation tools. Here you can understand the benefits of the technologies from companies that have recently implemented simulation using Altair SimSolid; and through interactive sessions, experience how easy it is to get started, even with limited resources or on the Cloud.

14:35 JST | 13:35 MYT | 11:05 IST

Session Introduction

Ando Makoto - ISID, Japan

14:40 JST | 13:40 MYT | 11:10 IST

Expert Chat: SimSolid Cloud - Simulate Anywhere

Girish Mudigonda - Product Manager, SimSolid - Altair

Moderator: Warren Dias – Director of Global OptiStruct Business Development – Altair

14:50 JST | 13:50 MYT | 11:20 IST

Vehicle Subframe Strength Analysis using Altair SimSolid

Kim Sungeun - Donghee, Korea

Suspension components are connected to the body to support weight and reduce road shock. Various tests and analytical evaluations are being conducted to evaluate these suspension parts, but the time to evaluate these parts is limited compared to the period required for vehicle development.

In this presentation, compared to the existing FEA software, by using the Mesh-Free Method SimSolid, we increased work efficiency by significantly reducing the time spent on analysis while maintaining the consistency of the analysis results.

15:05 JST | 14:05 MYT | 11:35 IST

SimSolid vs Traditional FEA​

Li Zhe Khor - Material Engineer - Keysight Technologies, Malaysia

This study presents a comparative analysis of traditional Finite Element Analysis (FEA) and SimSolid, a new structural analysis software, for simulating the von Mises stress of a mechanical rack system used to support heavy equipment. The accuracy and efficiency of SimSolid are evaluated under different loading conditions, including stress and displacement, using a Keysight mechanical rack system. The rack has a complex geometry, composed of a complex design plates with multiple attachment points, and is modeled as a single assembly ... Read More

On-Demand Presentations

Warren Dias – Director of Global OptiStruct Business Development – Altair
Simon Zwingert – Technical Consultant – Altair

Analysis of The Impact of Pretension In The Assembly of Truss When There Are a Greater Number of Preloaded Fasteners

Vidya Prakash G S - Manager CAE - Lakshmi Machine Works Ltd., India

Lakshmi Machine Works Limited (LMW), a leading Textile Machinery Manufacturer in India and one among the three in the world to produce the entire range of Spinning Machinery.

Fastener pretension is a common technique in mechanical engineering that is used to assemble parts in preload. The preload should neither be higher nor lower than required. Optimizing preload is always a challenge in parts assembly since it requires ample of iterations. Solving fastener physical 3D modelling approach in classical FEA software ... Read More

15:20 JST | 14:20 MYT | 11:50 IST

Demonstration - SimSolid

Ujwal Patnaik - Direktor, Produktstrategie und Preisgestaltung - Altair

Simon Zwingert – Technical Consultant – Altair

15:30 JST | 14:30 MYT | 12:00 IST

Live Q&A

Simulation-Driven Design

Simulation-Driven Design

Learn from other small and medium design and engineering teams how simulation can be applied early in the product development lifecycle, to rapidly accelerate the creation and optimization of structurally efficient parts, systems, and assemblies. Attend this session to see how a simulation-driven design approach, using Altair Inspire, can reduce your development time while saving development and manufacturing costs.

14:35 JST | 13:35 MYT | 11:05 IST

Session Introduction

Hirisoft (Dalian), China

14:40 JST | 13:40 MYT | 11:10 IST

Expert Chat: Accelerate Simulation-Driven Design with Altair Inspire

Andrew Bartels - Vizepräsident, Programmmanagement - Altair

Moderator: Simone Bonino – VP of Business Development Manufacturing Solutions – Altair

14:50 JST | 13:50 MYT | 11:20 IST

Altair Inspire Simulation Driven Design / Aided Generative Design and 3D Printing Technology

Tan Hong - Vice President of Technology - SAPW Technology, China

In the new energy vehicle and new materials fields, we face not only the challenge from the manufacturing process, but also the problem of multiple iterative designs due to manufacturing.If we consider the manufacturing issue in 3D printing process in the early stage of structure design, we can greatly reduce the structure repairs later and shorten the product production cycle. In addition, with the rise of generative design, customers are more sensitive with the mass of components. How to achieve ... Read More

15:05 JST | 14:05 MYT | 11:35 IST

Carrier Plate Design Optimization using Altair Inspire

Kim Seungtae - CAE Team Leader - Kwangjin, Korea

When designing mass production to improve quality problems and reduce weight of window regulator parts that are difficult to standardize, Altair Inspire was applied to optimize design. The window regulator is a device that is housed in the door of a vehicle and raises and lowers the glass. Among them, the carrier plate is a part that fixes the glass, moves along the rail, and lifts and lowers the glass, and is responsible for many functions.
The carrier plate ... Read More

12:45 ET | 09:45 PST

On-Demand Presentations

  • SMRI, UiTM, Malaysia
  • National Kaohsiung University of Science and Technology (NKUST) – Republic of China
  • U-Shin India Private Ltd. India
12:55 ET | 09:55 PST

Distortion Analysis of Topology-optimized Aileron Bracket using Thermomechanical Simulation with Experimental Validation

Yupiter HP Manurung - SMRI - UiTM, Malaysia

This research aims to investigate the accuracy of thermomechanical simulation in predicting aileron bracket distortion made of austenitic stainless steel SS316L additively manufactured using selective laser melting (SLM). SLM-based components often induce significant distortion as result of high temperature gradient induced by rapid cooling of the melt during fabrication process. This study begins with utilization of topology optimization to obtain optimal material layout based on defined loads and constraints as well as design objective to minimize mass with desired safety ... Read More

Motion Analysis of Rear Suspension System of Heavy Scooter and Design of Rear Swingarm by Using Altair Inspire

Joe Chia-Chin Wu - Assistant Professor - National Kaohsiung University of Science and Technology (NKUST)

The design of rocker arm and swingarm of the rear suspension system for a heavy scooter was conducted in this project, in which both components were expected to be manufactured by gravity casting with the cast aluminium alloy JIS ADC 12. The rear suspension system was comprised of engine block, exhaust system, transmission system, brake system, shock absorber(s), swingarm, wheel, and tire. Besides, this rear suspension system was a common design of two alternative versions, including middle mono shock and ... Read More

15:20 JST | 14:20 MYT | 11:50 IST

Demonstration - Inspire

Tony Gray - Technical Director - Altair

15:30 JST | 14:30 MYT | 12:00 IST

Live Q&A

Exploring Multiphysics

Exploring Multiphysics - How can Design Engineers Simulate like a Pro

Unleash the full power of simulation by exploring the behavior of your products in any possible working condition to maximize performance and improve robustness. Through examples and best practices, find out how Altair SimLab based easy-to-use Multiphysics solutions can inject innovation, and how our unique token-based licensing model makes it highly cost-effective.

15:40 JST | 14:40 MYT | 12:10 IST

Session Introduction

Dr. Laxminarayan K - National Technical Manager - DesignTech Systems, India

15:45 JST | 14:45 MYT | 12:15 IST

Expert Chat: Handling Multiphysics Workflows with CAD associativity in Altair SimLab

Guna Krishna - Sr. VP, SimLab development - Altair

Moderator: Ujwal Patnaik – Director, Product Strategy – Altair

15:55 JST | 14:55 MYT | 12:25 IST

Automotive Electronics Regulation (Head Impact Testing) Analysis of Central Information Display System

Hsu Yuan-Lung - Phd / Associate Manager - Hon-Hai Technology Group (Foxconn)

To do the transient analysis on a complex system, it is challenging from research, design, CAE analysis to test verification. By integrating solutions with Simlab, HWs, Radioss and Hyperlife, we are able to ensure the accuracy the Simlab’s powerful mesh capabilities, so as to know how to improve the system design.

16:10 JST | 15:10 MYT | 12:40 IST

Thermal Sensitivity Analysis of Transformer used in On-Board Charger of Electric vehicle

Poonam Gurav - CAE Staff Engineer - UNO Minda Ltd.
Jadhav Shantaram - UNO Minda Ltd.

Nowadays, many countries are shifting from IC engine vehicle to electric vehicles because of its environment pollution. Battery charging is a main part of electric vehicle. On-Board charger is generally used in vehicle for the charging as well as monitoring charge rate of battery. The electric components of OBC board are diodes, MOSFETs, inductors and transformer. Among these components, the transformer is a higher heat generating component which can leads to overheating and breakdown of OBC board. For correct design ... Read More

16:25 JST | 15:25 MYT | 12:55 IST

Demonstration - SimLab use Cases

D V Siddharth - SimLab Specialist - Electronics - Altair

16:35 JST | 15:35 MYT | 13:05 IST

Live Q&A

16:45 JST | 15:45 MYT | 13:10 IST

Workshop: Using Simulation-Driven Design from Concept Development to Final Design

Ujwal Patnaik - Director, Product Strategy - Altair

17:05 JST | 16:05 MYT | 13:30 IST

Live Q&A & Wrap-Up

Manufacturing Simulation

Manufacturing Simulation - Simulation-Driven Design for Manufacturing

With a SDfM approach, product designers can be confident in their chosen manufacturing method because design flaws can be detected much earlier and corrected before any physical prototyping has to be done.In this session find out how to plan for the manufacturing process & understanding critical parameters, Defects and issues, and challenges. Also, ideas of enhancing your manufacturing process, targeting, improved Yield, optimal energy, lowering wastage, improve tool life and enhance production quality for Forming/Stamping and Casting

15:40 JST | 14:40 MYT | 12:10 IST

Session Introduction

Trinity Engineering, Korea

15:45 JST | 14:45 MYT | 12:15 IST

Expert Chat: Simulation Design for Manufacturing

Ravi Kunju - Chief Product and Strategy Officer - Altair

Moderator: Simone Bonino – VP of Business Development Manufacturing Solutions – Altair

15:55 JST | 14:55 MYT | 12:25 IST

Multistage Stamping Process Validation of Reinforcement Cross Member Front Using Altair Inspire Form

Pravin Dileep Nawale - Design Engineer - Mungi Engineers Pvt. Ltd.

Reinforcement Cross Member Front is a vital structural component used in a Cross Member Front Assembly of a car, which is a sheet metal component.

To develop the tooling method plan for Reinforcement Cross Member Front component, customer provide us component 3D cad data, Part drawing etc. from the part CAD model we generate the surface model of the tools for each forming stage in Catia V5. We setup the multistage operation considering the real time process condition in Altair ... Read More

16:10 JST | 15:10 MYT | 12:40 IST

Casting Simulation Analysis of Spigot Gate Valve

Ranjit R - Sr. Engineer - Mcwane India Pvt Ltd.

McWane India Private Limited is a manufacturer & Supplier of Gate Valves, spigot valve, Butterfly Valves, Check Valve, Air Relief Valve, etc. These products are manufactured from high quality metals and alloys.

Running simulations for casting have gained popularity in industries since it helps study mould filling, solidifying metal, and cooling part in the cast. Moreover, it is of great use to understand the probable locations where internal defects such as shrinkage porosity might occur without prototypes, thereby saving time ... Read More

13:50 ET | 10:50 PST

On-Demand Presentations

14:00 ET | 11:00 PST

Defects Analysis on Investment Casting Process using Altair Inspire Cast with Experimental Validation

Yupiter Manurung - Professor - Universiti Teknologi MARA (UiTM)
Azri Rahimi - Postgraduate Researcher - Universiti Teknologi MARA (UiTM)

This research deals with the application of the numerical simulation for analyzing the defects in investment casting process. Upon visual inspection of the preliminary casting design of component as vehicle barrier support, it has been discovered that shrinkage porosity is often present. The component is made of austenitic stainless steel SS304 with gravity pouring process. The simulation starts with creation of the CAD model of the product using CATIA. The actual location of shrinkage porosity is compared with the numerical ... Read More

14:05 ET | 11:05 PST

Effectiveness of Altair Inspire Cast Simulation Software for Development of Thin-Walled Stainless Steel Investment Castings, Primarily Used In Valve Industry.

Ravi Karjatkar - Technical Director, Linit Exports Private Limited - Foundry Division, India

Main objectives of this technical study are to reduce the lead time in production of leak proof and defect free investment castings, and at the same time saving significant cost by avoiding multiple real life casting trials.

This paper describes the effectiveness of Altair Inspire Cast simulation software in prediction of the critical investment casting defects.

The key focus of this paper is on estimating and correlating casting soundness and defects seen in software simulation and those observed on real ... Read More

16:25 JST | 15:25 MYT | 12:55 IST

Demonstration

Inspire Form: Hariharasudhan Palaniswamy – Senior Program Manager – Altair

Inspire Cast: Martin Solina – Vice President, Inspire Manufacturing Solutions – Altair

16:35 JST | 15:35 MYT | 13:05 IST

Live Q&A

16:45 JST | 15:45 MYT | 13:10 IST

Workshop: Using Simulation-Driven Design from Concept Development to Final Design

Ujwal Patnaik - Director, Product Strategy - Altair

17:05 JST | 16:05 MYT | 13:30 IST

Live Q&A & Wrap-Up

EMEA CET 11:00 | BST 10:00
Keynotes
11:00 CET | 10:00 BST

Welcome & Introduction Altair

Pavan Kumar - SVP, Global Indirect Business - Altair

11:05 CET | 10:05 BST

Altair Keynote - Simulation at the Speed of Design

Ravi Kunju - Chief Product and Strategy Officer - Altair

11:20 CET | 10:20 BST

Simulation's Role in Developing the Lightweight, All Titanium Brompton

Yan Pugh-Jones - Engineering Director - Brompton Bicycle
Steven Harry - Lead Structural Engineer - Brompton Bicycle

11:35 CET | 10:35 BST

FireChat: SMB's Challenges to Adopting Simulation-Driven Design

Michael Larner - Research Director - ABI Research

Moderator: Ujwal Patnaik – Director, Product Strategy – Altair

11:55 CET | 10:55 BST

Live Q&A

Simulation Starters

Simulation Starters - Everyone Can Simulate

A session designed for those who do not currently use simulation technologies, are outsourcing most/all of their analysis, or still use limited CAD embedded simulation tools. Here you can understand the benefits of the technologies from companies that have recently implemented simulation using Altair SimSolid; and through interactive sessions, experience how easy it is to get started, even with limited resources or on the Cloud

11:05 CET | 11:05 BST

Session Introduction

Wasim Younis - Simulation Manager - Symetri, UK

12:10 CET | 11:10 BST

Expert Chat: SimSolid Cloud - Simulate Anywhere

Girish Mudigonda - Product Manager, SimSolid - Altair

Moderator: Warren Dias – Director of Global OptiStruct Business Development – Altair

12:20 CET | 11:20 BST

Accelerate Underrun Bar and Chassis Design and Development

Mohamadreza Jenaban - Principal Technical Engineer - SDC Trailer, UK

  • SimSolid has enabled us to work on production models.
  • SimSolid has enabled us to design to strict VCA guidelines.
  • SimSolid has enabled us to increase our technical competence across a wider team
12:35 CET | 11:35 BST

Exhaust System Cold end Hanger rod and Muffler Shell Stiffness Analysis using SimSolid

Suresh N - Deputy Manager - FEA & R&D for Structural Durability Simulation - Sharda Motor Industries Ltd. R&D, India

Exhaust system suppliers are continuously improving and adopting advanced simulation techniques and quick testing proceduresfor exhaust system optimization to address time to market, faster vehicle launch and first time and all time right strategy to comply performance and durability. This paper deals with the methodology development of Exhaust system Cold end hanger rod and Muffler Shell stiffness analysis using Mesh less simulation tool SimSolid. During concept stage, design team will develop the CAD model of whole Cold end system based ... Read More

12:50 CET | 11:50 BST

Demonstration - SimSolid

Simon Zwingert - Technical Consultant - Altair

Lakshmi Machine Works Limited (LMW), ein führender Textilmaschinenhersteller in Indien und einer der drei weltweit, die die gesamte Palette der Spinnereimaschinen herstellen.

Das Vorspannen von Verbindungselementen ist eine im Maschinenbau weit verbreitete Technik, die dazu dient, Teile unter Vorspannung zu montieren. Die Vorspannung sollte weder höher noch niedriger als erforderlich sein. Die Optimierung der Vorspannung ist bei der Montage von Teilen immer eine Herausforderung, da sie zahlreiche Iterationen erfordert. Die Lösung der physikalischen 3D-Modellierung von Verbindungselementen in klassischer FEA-Software ist ... Read More

13:00 CET | 12:00 BST

Live Q&A

Simulation-Driven Design

Simulation-Driven Design

Learn from other small and medium design and engineering teams how simulation can be applied early in the product development lifecycle, to rapidly accelerate the creation and optimization of structurally efficient parts, systems, and assemblies. Attend this session to see how a simulation-driven design approach, using Altair Inspire, can reduce your development time while saving development and manufacturing costs.

12:05 CET | 11:05 BST

Session Introduction

sT Engineering, Turkey

12:10 CET | 11:10 BST

Expert Chat: Accelerate Simulation-Driven Design with Altair Inspire

Andrew Bartels - Vizepräsident, Programmmanagement - Altair

Moderator: Simone Bonino – VP of Business Development Manufacturing Solutions – Altair

12:20 CET | 11:20 BST

Patient-Specific Implants: Power of Simulation and Design for Improved Patient Outcomes

Marques Felipe - CEO - BioArchitects, Brazil

The healthcare industry is rapidly evolving, and historically, standard-sized prostheses made from various materials such as titanium, steel, and PEEK were the primary implant options for patients. These implants undergo rigorous testing according to the standards of each country to ensure safety and effectiveness in daily activities, such as chewing and walking. However, research suggests that conventional implants may not adapt optimally to different anatomical shapes, which can significantly affect surgical success and patient health.

12:35 CET | 11:35 BST

E-Shifter Ribs Topology Optimisation

Abhishek Thakur - Senior Design Engineer - U-Shin India Private Ltd., India

E-Shifter includes a knob and lever arrangement similar to a conventional gear shifter.While conducting structural analysis, the lever component showed high stress concentration on ribs as compare to the allowable stress. The rib structure needed to be improved and was hence chosen as the optimisation target. With the help of Altair Inspire, we have optimised the design of ribs in a lever of EShifter. The main purpose of this topology optimisation is to achieve a design which satisfies the supplier ... Read More

12:50 CET | 11:50 BST

Demonstration - Inspire

Tony Gray - Technical Director - Altair

  • SMRI, UiTM, Malaysia
  • National Kaohsiung University of Science and Technology (NKUST) – Republic of China
  • U-Shin India Private Ltd, India
13:00 CET | 12:00 BST

Live Q&A

Exploring Multiphysics

Exploring Multiphysics - How can Design Engineers Simulate like a Pro

Unleash the full power of simulation by exploring the behavior of your products in any possible working condition to maximize performance and improve robustness. Through examples and best practices, find out how Altair SimLab based easy-to-use Multiphysics solutions can inject innovation, and how our unique token-based licensing model makes it highly cost-effective.

13:35 CET | 12:35 BST

Session Introduction

Mika Ketola - Account Manager - CaeTek, Nordic

13:40 CET | 12:40 BST

Expert Chat: Handling Multiphysics Workflows with CAD associativity in Altair SimLab

Guna Krishna - Sr. VP, SimLab development - Altair

Moderator: Ujwal Patnaik – Director, Product Strategy – Altair

13:50 CET | 12:50 BST

The Efficient Meshing of Large Combustion Engines by SimLab

Antti Mäntylä - Senior Expert - Wärtslilä, Finland

Altair SimLab enables the meshing of complex parts and assemblies fast and with high quality. The possibility to automatically generate FEM models from CAD geometry speeds up the simulation of design iterations, enables parametric optimization, and minimizes manual work

14:05 CET | 13:05 BST

Use of SimLab Software To Satisfy Analysis of High-Pressure Clamps In Line With Api 6x

Luke Miller - Design Engineer - Destec Engineering

DESTEC operates within the oil and gas industry where the design and production of all products is heavily controlled by the standards we work to, they govern everything from the formulae used in our calculations to the allowable shape profiles of certain components. Because of this, we must stay in line with the most recent versions of the ASME code and the API Specification so that we may retain a competitive edge.

We are looking to begin designing some of ... Read More

14:20 CET | 13:20 BST

Demonstration - SimLab Use Cases

D V Siddharth - SimLab Specialist, Electronics - Altair

14:30 CET | 13:30 BST

Live Q&A

14:35 CET | 13:35 BST

Workshop: Using Simulation-Driven Design from Concept Development to Final Design

Ujwal Patnaik - Director, Product Strategy - Altair

14:55 CET | 13:55 BST

Live Q&A & Wrap-Up

Manufacturing Simulation

Manufacturing Simulation - Simulation-Driven Design for Manufacturing

With an SDFM approach, product designers can be confident in their chosen manufacturing method because design flaws can be detected much earlier and corrected before any physical prototyping has to be done. In this session find out how to plan for the manufacturing process & understanding critical parameters, Defects and issues, and challenges. Also, ideas of enhancing your manufacturing process, targeting, improved Yield, optimal energy, lowering wastage, improving tool life, and enhancing production quality for Forming/Stamping and Casting.

13:35 CET | 12:35 BST

Session Introduction

Rob Shropshire - Director - Origin Engineering Solutions, UK

13:40 CET | 12:40 BST

Expert Chat: Simulation Design for Manufacturing

Ravi Kunju - Chief Product and Strategy Officer - Altair

Moderator: Simone Bonino – VP of Business Development Manufacturing Solutions – Altair

13:50 CET | 12:50 BST

Manufacturing Feasibility / Process Simulation with Altair Inspire Form

Gökhan Cetinkaya - CEO - Presskon Engg, Gmbh

In our Presentation, we present a case study of how we integrated FEM simulation into our Workflow. In today’s competitive environment, Tool & Die Design Offices must continuously improve their design and manufacturing processes to stay ahead of the competition. FEM simulation can help design engineers optimize their workflow, reduce costs, and improve product quality.

14:05 CET | 13:05 BST

Benchmark Die Casting Housing - Comparison Simulation - Reality

Rainer Böke - Managing Director - Böke-IE GmbH & Co. KG

Benchmark Die Casting Housing – Comparison Simulation – Reality

In our benchmark, together with the companies Sydow Druckguss GmbH and APS Wenden we show casting defects and expected problem areas and compare them with X-ray and sectional images. The results show how close we are to the actual results with our predictions from the FEM simulation.

On-Demand Presentations

  • Skaigh Engineering – UK

Improving Method Development with Casting Simulation

Mike Harper - Director - Skaigh Engineering

Casting companies are under constant pressure to do things quicker at a reduced cost. Casting Simulation provides an ability to speed up method development, reduce physical try-outs and spot defects early in order to cut down on waste and improve yields. The session will feature case studies from Skaigh Engineering, demonstrating how they have implemented Inspire Cast to solve real-world production challenges, saving both time cost.

14:20 CET | 13:20 BST

Demonstration

Inspire Form: Hariharasudhan Palaniswamy – Senior Program Manager – Altair
Inspire Cast: Martin Solina – Vice President, Inspire Manufacturing Solutions – Altair

14:30 CET | 13:30 BST

Live Q&A

14:35 CET | 13:35 BST

Workshop: Using Simulation-Driven Design from Concept Development to Final Design

Ujwal Patnaik - Director, Product Strategy - Altair

14:55 CET | 13:55 BST

Live Q&A & Wrap-Up

AMER ET 11:00 | PST 08:00
Keynotes
11:00 ET | 08:00 PST

Welcome & Introduction Altair

Pavan Kumar - SVP, Global Indirect Business - Altair

11:05 ET | 08:05 PST

Altair Keynote - Simulation at the Speed of Design

Ravi Kunju - Chief Product and Strategy Officer - Altair

11:20 ET | 08:20 PST

Simulation's Role in Developing the Lightweight, All Titanium Brompton

Yan Pugh-Jones - Engineering Director - Brompton Bicycle
Steven Harry - Lead Structural Engineer - Brompton Bicycle

11:35 ET | 08:35 PST

FireChat: SMB's Challenges to Adopting Simulation-Driven Design

Michael Larner - Research Director - ABI Research

Moderator: Ujwal Patnaik – Director, Product Strategy – Altair

11:55 ET | 08:55 PST

Live Q&A

Simulation Starters

Simulation Starters Everyone Can Simulate!

A session designed for those who do not currently use simulation technologies, are outsourcing most/all of their analysis, or still use limited CAD embedded simulation tools. Here you can understand the benefits of the technologies from companies that have recently implemented simulation using Altair SimSolid; and through interactive sessions, experience how easy it is to get started, even with limited resources or on the Cloud

12:00 ET | 09:00 PST

Session Introduction

Tyler Haggin - COO, TrueInsight - USA.

12:05 ET | 09:05 PST

Expert Chat: SimSolid Cloud - Simulate Anywhere

Girish Mudigonda - Product Manager, SimSolid - Altair

Moderator: Warren Dias – Director of Global OptiStruct Business Development – Altair

12:15 ET | 09:15 PST

Highway Trailer Pneumatic Suspension Bracket Development Using Test Data and Meshless Simulation Technology

Bruno Mollon - Engineer - Suspensys, Brazil

The work developed introduces a new product development cycle and applies this new concept to a pneumatic suspension bracket. The new workflow includes the use of meshless technology in the concept definition phase of the design and the use of the finite element method to validate the final version of the design. The workflow was expanded to include the usage of test data to define realistic load cases to correctly dimensioning of the component to accommodate the project criterions. In ... Read More

12:30 ET | 09:30 PST

Multi Stage Separation Structural Analysis using Altair SimSolid

Shreesha M - Propulsion Engineer - Skyroot Aerospace, India

Rocket stage separation is one of the critical aspects of rocket operation. Successful stage separation is ensured by accuracy in design and timing. An intricate mechanism is realized on par with our rocket stage specification. In search of a tool to analyze this design, we crossed paths with ALTAIR SIMSOLID.
To ascertain separation mechanism design, the model consisting of multiple components has to be analyzed for both, static and dynamic behaviors. The mechanism has a great ... Read More
12:45 ET | 09:45 PST

Demonstration - SimSolid

Simon Zwingert - Technical Consultant - Altair

  • LMW, India
  • Sharda Motors, India
  • Skyroot Aerospace, India
12:55 ET | 09:55 PST

Live Q&A

Simulation-Driven Design

Simulation-Driven Design

Learn from other small and medium design and engineering teams how simulation can be applied early in the product development lifecycle, to rapidly accelerate the creation and optimization of structurally efficient parts, systems, and assemblies. Attend this session to see how a simulation-driven design approach, using Altair Inspire, can reduce your development time while saving development and manufacturing costs.

12:00 ET | 09:00 PST

Session Introduction

Valmir Fleischman - Director of Operations, VirtualCAE - Brazil

12:05 ET | 09:05 PST

Expert Chat: Accelerate Simulation-Driven Design with Altair Inspire

Andrew Bartels - Vizepräsident, Programmmanagement - Altair

Moderator: Simone Bonino – VP of Business Development Manufacturing Solutions – Altair

12:15 ET | 09:15 PST

Patient-Specific Implants: Power of Simulation and Design for Improved Patient Outcomes

Marques Felipe - CEO - BioArchitects, Brazil

The healthcare industry is rapidly evolving, and historically, standard-sized prostheses made from various materials such as titanium, steel, and PEEK were the primary implant options for patients. These implants undergo rigorous testing according to the standards of each country to ensure safety and effectiveness in daily activities, such as chewing and walking. However, research suggests that conventional implants may not adapt optimally to different anatomical shapes, which can significantly affect surgical success and patient health.

Recent technological advancements and their ... Read More

12:30 ET | 09:30 PST

E-Shifter Ribs Topology Optimisation

Abhishek Thakur - Senior Design Engineer - U-Shin India Private Ltd. India

E-Shifter includes a knob and lever arrangement similar to a conventional gear shifter.While conducting structural analysis, the lever component showed high stress concentration on ribs as compare to the allowable stress. The rib structure needed to be improved and was hence chosen as the optimisation target. With the help of Altair Inspire, we have optimised the design of ribs in a lever of EShifter. The main purpose of this topology optimisation is to achieve a design which satisfies the supplier ... Read More

12:45 ET | 09:45 PST

Demonstration - Inspire

Tony Gray - Technical Director - Altair

  • SMRI, UiTM, Malaysia
  • National Kaohsiung University of Science and Technology (NKUST) – Republic of China
  • U-Shin India Private Ltd, India
12:55 ET | 09:55 PST

Live Q&A

Exploring Multiphysics

Exploring Multiphysics - How can Design Engineers Simulate like a Pro

Unleash the full power of simulation by exploring the behavior of your products in any possible working condition to maximize performance and improve robustness. Through examples and best practices, find out how Altair Simlab-based easy-to-use Multiphysics solutions can inject innovation, and how our unique token-based licensing model makes it highly cost-effective.

13:05 ET | 10:05 PST

Session Introduction

Esteban Foronda - Application Engineer, - Corpoeco, Colombia

13:10 ET | 10:10 PST

Expert Chat: Handling Multiphysics Workflows with CAD associativity in Altair SimLab

Guna Krishna - Sr. Vice President, SimLab Development - Altair

Moderator: Ujwal Patnaik – Director, Product Strategy – Altair

13:20 ET | 10:20 PST

Predicting Product Quality Better and Faster with Altair SimLab

William Villers - CTO - TEN TECH AEROSPACE AND DEFENSE

TEN TECH AEROSPACE & DEFENSE, INC. provides multi-discipline engineering services including high-end mechanical engineering design, analysis, physical testing support and hardware prototyping services.
Because speed and accuracy are top priorities, we selected Altair® SimLab® for its intuitive interface that allows users to stay in the same tool for the entire process from meshing and setup to solving and visualization. Since we have historically have worked with large designs, where more than 200 million elements are common, we needed a ... Read More

13:35 ET | 10:35 PST

The Efficient Meshing of Large Combustion Engines by SimLab

Antti Mäntylä - Senior Expert - Wärtslilä, Finland

13:50 ET | 10:50 PST

Demonstration - SimLab Use Cases

D V Siddharth - SimLab Specialist, Electronics - Altair

14:00 ET | 11:00 PST

Live Q&A

14:05 ET | 11:05 PST

Workshop: Using Simulation-Driven Design from Concept Development to Final Design

Ujwal Patnaik - Director, Product Strategy - Altair

14:25 ET | 11:25 PST

Live Q&A & Wrap-Up

Manufacturing Simulation

Simulation-Driven Design for Manufacturing

With an SDFM approach, product designers can be confident in their chosen manufacturing method because design flaws can be detected much earlier and corrected before any physical prototyping has to be done. In this session find out how to plan for the manufacturing process & understanding critical parameters, Defects and issues, and challenges. Also, ideas of enhancing your manufacturing process, targeting, improved Yield, optimal energy, lowering wastage, improving tool life, and enhancing product quality for Forming/Stamping and Casting.

13:05 ET | 10:05 PST

Session Introduction

Syed Ali - Application Engineer - FutureScape - Canada

13:10 ET | 10:10 PST

Expert Chat: Simulation Design for Manufacturing

Ravi Kunju - Chief Product and Strategy Officer - Altair

Moderator: Simone Bonino – VP of Business Development Manufacturing Solutions – Altair

13:20 ET | 10:20 PST

Manufacture High-Quality Metal Formed Parts First Time with Simulation

Jay Weiner - Founder - BiggerBoat Solutions, Canada

Metal formed parts must meet rigorous quality, safety, and performance standards. To achieve this, companies typically conduct physical tests or try-outs, which can often be expensive and time-consuming. If the part has defects, it needs to be re-designed, resulting in lost tooling costs and wasted material.

With decades of experience in tool and die design and manufacturing, Jay Weiner, founder and forming specialist at BiggerBoat Solutions Ltd. in Ontario, Canada, will share some insights on how using Altair solutions has ... Read More

13:35 ET | 10:35 PST

Improving Method Development with Casting Simulation

Mike Harper - Director - Skaigh Engineering

Casting companies are under constant pressure to do things quicker at a reduced cost. Casting Simulation provides an ability to speed up method development, reduce physical try-outs and spot defects early in order to cut down on waste and improve yields. The session will feature case studies from Skaigh Engineering, demonstrating how they have implemented Inspire Cast to solve real-world production challenges, saving both time cost.

13:50 ET | 10:50 PST

Demonstration

Inspire Form: Hariharasudhan Palaniswamy – Senior Program Manager – Altair
Inspire Cast: Martin Solina – Vice President, Inspire Manufacturing Solutions – Altair

14:00 ET | 11:00 PST

Live Q&A

14:05 ET | 11:05 PST

Workshop: Using Simulation-Driven Design From Concept Development to Final Design

Ujwal Patnaik - Director, Product Strategy - Altair

14:25 ET | 11:25 PST

Live Q&A & Wrap-Up

Ujwal Patnaik - Director, Product Strategy - Altair

APAC JST 13:30 | MYT 12:30 | IST 10:00
EMEA CET 11:00 | BST 10:00
AMER ET 11:00 | PST 08:00
Keynotes
Simulation Starters
Simulation-Driven Design
Exploring Multiphysics
Manufacturing Simulation
Keynotes
Simulation Starters
Simulation-Driven Design
Exploring Multiphysics
Manufacturing Simulation
Keynotes
Simulation Starters
Simulation-Driven Design
Exploring Multiphysics
Manufacturing Simulation
13:30 JST | 12:30 MYT | 10:00 IST

Welcome & Introduction Altair

Pavan Kumar - SVP, Global Indirect Business - Altair

13:35 JST | 12:35 MYT | 10:05 IST

Altair Keynote - Simulation at the Speed of Design

Ravi Kunju - Chief Product and Strategy Officer - Altair

13:50 JST | 12:50 MYT | 10:20 IST

Simulation's Role in Developing the Lightweight, All Titanium Brompton

Yan Pugh-Jones - Engineering Director - Brompton Bicycle
Steven Harry - Lead Structural Engineer - Brompton Bicycle

14:05 JST | 13:05 MYT | 10:35 IST

FireChat: SMB's Challenges to Adopting Simulation-Driven Design

Michael Larner - Research Director - ABI Research

Moderator: Ujwal Patnaik – Director, Product Strategy – Altair

14:25 JST | 13:25 MYT | 10:55 IST

Live Q&A

Simulation Starters - Everyone Can Simulate

A session designed for those who do not currently use simulation technologies, are outsourcing most/all of their analysis, or still use limited CAD embedded simulation tools. Here you can understand the benefits of the technologies from companies that have recently implemented simulation using Altair SimSolid; and through interactive sessions, experience how easy it is to get started, even with limited resources or on the Cloud.

14:35 JST | 13:35 MYT | 11:05 IST

Session Introduction

Ando Makoto - ISID, Japan

14:40 JST | 13:40 MYT | 11:10 IST

Expert Chat: SimSolid Cloud - Simulate Anywhere

Girish Mudigonda - Product Manager, SimSolid - Altair

Moderator: Warren Dias – Director of Global OptiStruct Business Development – Altair

14:50 JST | 13:50 MYT | 11:20 IST

Vehicle Subframe Strength Analysis using Altair SimSolid

Kim Sungeun - Donghee, Korea

Suspension components are connected to the body to support weight and reduce road shock. Various tests and analytical evaluations are being conducted to evaluate these suspension parts, but the time to evaluate these parts is limited compared to the period required for vehicle development.

In this presentation, compared to the existing FEA software, by using the Mesh-Free Method SimSolid, we increased work efficiency by significantly reducing the time spent on analysis while maintaining the consistency of the analysis results.

15:05 JST | 14:05 MYT | 11:35 IST

SimSolid vs Traditional FEA​

Li Zhe Khor - Material Engineer - Keysight Technologies, Malaysia

This study presents a comparative analysis of traditional Finite Element Analysis (FEA) and SimSolid, a new structural analysis software, for simulating the von Mises stress of a mechanical rack system used to support heavy equipment. The accuracy and efficiency of SimSolid are evaluated under different loading conditions, including stress and displacement, using a Keysight mechanical rack system. The rack has a complex geometry, composed of a complex design plates with multiple attachment points, and is modeled as a single assembly ... Read More

On-Demand Presentations

Warren Dias – Director of Global OptiStruct Business Development – Altair
Simon Zwingert – Technical Consultant – Altair

Analysis of The Impact of Pretension In The Assembly of Truss When There Are a Greater Number of Preloaded Fasteners

Vidya Prakash G S - Manager CAE - Lakshmi Machine Works Ltd., India

Lakshmi Machine Works Limited (LMW), a leading Textile Machinery Manufacturer in India and one among the three in the world to produce the entire range of Spinning Machinery.

Fastener pretension is a common technique in mechanical engineering that is used to assemble parts in preload. The preload should neither be higher nor lower than required. Optimizing preload is always a challenge in parts assembly since it requires ample of iterations. Solving fastener physical 3D modelling approach in classical FEA software ... Read More

15:20 JST | 14:20 MYT | 11:50 IST

Demonstration - SimSolid

Ujwal Patnaik - Direktor, Produktstrategie und Preisgestaltung - Altair

Simon Zwingert – Technical Consultant – Altair

15:30 JST | 14:30 MYT | 12:00 IST

Live Q&A

Simulation-Driven Design

Learn from other small and medium design and engineering teams how simulation can be applied early in the product development lifecycle, to rapidly accelerate the creation and optimization of structurally efficient parts, systems, and assemblies. Attend this session to see how a simulation-driven design approach, using Altair Inspire, can reduce your development time while saving development and manufacturing costs.

14:35 JST | 13:35 MYT | 11:05 IST

Session Introduction

Hirisoft (Dalian), China

14:40 JST | 13:40 MYT | 11:10 IST

Expert Chat: Accelerate Simulation-Driven Design with Altair Inspire

Andrew Bartels - Vizepräsident, Programmmanagement - Altair

Moderator: Simone Bonino – VP of Business Development Manufacturing Solutions – Altair

14:50 JST | 13:50 MYT | 11:20 IST

Altair Inspire Simulation Driven Design / Aided Generative Design and 3D Printing Technology

Tan Hong - Vice President of Technology - SAPW Technology, China

In the new energy vehicle and new materials fields, we face not only the challenge from the manufacturing process, but also the problem of multiple iterative designs due to manufacturing.If we consider the manufacturing issue in 3D printing process in the early stage of structure design, we can greatly reduce the structure repairs later and shorten the product production cycle. In addition, with the rise of generative design, customers are more sensitive with the mass of components. How to achieve ... Read More

15:05 JST | 14:05 MYT | 11:35 IST

Carrier Plate Design Optimization using Altair Inspire

Kim Seungtae - CAE Team Leader - Kwangjin, Korea

When designing mass production to improve quality problems and reduce weight of window regulator parts that are difficult to standardize, Altair Inspire was applied to optimize design. The window regulator is a device that is housed in the door of a vehicle and raises and lowers the glass. Among them, the carrier plate is a part that fixes the glass, moves along the rail, and lifts and lowers the glass, and is responsible for many functions.
The carrier plate ... Read More

12:45 ET | 09:45 PST

On-Demand Presentations

  • SMRI, UiTM, Malaysia
  • National Kaohsiung University of Science and Technology (NKUST) – Republic of China
  • U-Shin India Private Ltd. India
12:55 ET | 09:55 PST

Distortion Analysis of Topology-optimized Aileron Bracket using Thermomechanical Simulation with Experimental Validation

Yupiter HP Manurung - SMRI - UiTM, Malaysia

This research aims to investigate the accuracy of thermomechanical simulation in predicting aileron bracket distortion made of austenitic stainless steel SS316L additively manufactured using selective laser melting (SLM). SLM-based components often induce significant distortion as result of high temperature gradient induced by rapid cooling of the melt during fabrication process. This study begins with utilization of topology optimization to obtain optimal material layout based on defined loads and constraints as well as design objective to minimize mass with desired safety ... Read More

Motion Analysis of Rear Suspension System of Heavy Scooter and Design of Rear Swingarm by Using Altair Inspire

Joe Chia-Chin Wu - Assistant Professor - National Kaohsiung University of Science and Technology (NKUST)

The design of rocker arm and swingarm of the rear suspension system for a heavy scooter was conducted in this project, in which both components were expected to be manufactured by gravity casting with the cast aluminium alloy JIS ADC 12. The rear suspension system was comprised of engine block, exhaust system, transmission system, brake system, shock absorber(s), swingarm, wheel, and tire. Besides, this rear suspension system was a common design of two alternative versions, including middle mono shock and ... Read More

15:20 JST | 14:20 MYT | 11:50 IST

Demonstration - Inspire

Tony Gray - Technical Director - Altair

15:30 JST | 14:30 MYT | 12:00 IST

Live Q&A

Exploring Multiphysics - How can Design Engineers Simulate like a Pro

Unleash the full power of simulation by exploring the behavior of your products in any possible working condition to maximize performance and improve robustness. Through examples and best practices, find out how Altair SimLab based easy-to-use Multiphysics solutions can inject innovation, and how our unique token-based licensing model makes it highly cost-effective.

15:40 JST | 14:40 MYT | 12:10 IST

Session Introduction

Dr. Laxminarayan K - National Technical Manager - DesignTech Systems, India

15:45 JST | 14:45 MYT | 12:15 IST

Expert Chat: Handling Multiphysics Workflows with CAD associativity in Altair SimLab

Guna Krishna - Sr. VP, SimLab development - Altair

Moderator: Ujwal Patnaik – Director, Product Strategy – Altair

15:55 JST | 14:55 MYT | 12:25 IST

Automotive Electronics Regulation (Head Impact Testing) Analysis of Central Information Display System

Hsu Yuan-Lung - Phd / Associate Manager - Hon-Hai Technology Group (Foxconn)

To do the transient analysis on a complex system, it is challenging from research, design, CAE analysis to test verification. By integrating solutions with Simlab, HWs, Radioss and Hyperlife, we are able to ensure the accuracy the Simlab’s powerful mesh capabilities, so as to know how to improve the system design.

16:10 JST | 15:10 MYT | 12:40 IST

Thermal Sensitivity Analysis of Transformer used in On-Board Charger of Electric vehicle

Poonam Gurav - CAE Staff Engineer - UNO Minda Ltd.
Jadhav Shantaram - UNO Minda Ltd.

Nowadays, many countries are shifting from IC engine vehicle to electric vehicles because of its environment pollution. Battery charging is a main part of electric vehicle. On-Board charger is generally used in vehicle for the charging as well as monitoring charge rate of battery. The electric components of OBC board are diodes, MOSFETs, inductors and transformer. Among these components, the transformer is a higher heat generating component which can leads to overheating and breakdown of OBC board. For correct design ... Read More

16:25 JST | 15:25 MYT | 12:55 IST

Demonstration - SimLab use Cases

D V Siddharth - SimLab Specialist - Electronics - Altair

16:35 JST | 15:35 MYT | 13:05 IST

Live Q&A

16:45 JST | 15:45 MYT | 13:10 IST

Workshop: Using Simulation-Driven Design from Concept Development to Final Design

Ujwal Patnaik - Director, Product Strategy - Altair

17:05 JST | 16:05 MYT | 13:30 IST

Live Q&A & Wrap-Up

Manufacturing Simulation - Simulation-Driven Design for Manufacturing

With a SDfM approach, product designers can be confident in their chosen manufacturing method because design flaws can be detected much earlier and corrected before any physical prototyping has to be done.In this session find out how to plan for the manufacturing process & understanding critical parameters, Defects and issues, and challenges. Also, ideas of enhancing your manufacturing process, targeting, improved Yield, optimal energy, lowering wastage, improve tool life and enhance production quality for Forming/Stamping and Casting

15:40 JST | 14:40 MYT | 12:10 IST

Session Introduction

Trinity Engineering, Korea

15:45 JST | 14:45 MYT | 12:15 IST

Expert Chat: Simulation Design for Manufacturing

Ravi Kunju - Chief Product and Strategy Officer - Altair

Moderator: Simone Bonino – VP of Business Development Manufacturing Solutions – Altair

15:55 JST | 14:55 MYT | 12:25 IST

Multistage Stamping Process Validation of Reinforcement Cross Member Front Using Altair Inspire Form

Pravin Dileep Nawale - Design Engineer - Mungi Engineers Pvt. Ltd.

Reinforcement Cross Member Front is a vital structural component used in a Cross Member Front Assembly of a car, which is a sheet metal component.

To develop the tooling method plan for Reinforcement Cross Member Front component, customer provide us component 3D cad data, Part drawing etc. from the part CAD model we generate the surface model of the tools for each forming stage in Catia V5. We setup the multistage operation considering the real time process condition in Altair ... Read More

16:10 JST | 15:10 MYT | 12:40 IST

Casting Simulation Analysis of Spigot Gate Valve

Ranjit R - Sr. Engineer - Mcwane India Pvt Ltd.

McWane India Private Limited is a manufacturer & Supplier of Gate Valves, spigot valve, Butterfly Valves, Check Valve, Air Relief Valve, etc. These products are manufactured from high quality metals and alloys.

Running simulations for casting have gained popularity in industries since it helps study mould filling, solidifying metal, and cooling part in the cast. Moreover, it is of great use to understand the probable locations where internal defects such as shrinkage porosity might occur without prototypes, thereby saving time ... Read More

13:50 ET | 10:50 PST

On-Demand Presentations

14:00 ET | 11:00 PST

Defects Analysis on Investment Casting Process using Altair Inspire Cast with Experimental Validation

Yupiter Manurung - Professor - Universiti Teknologi MARA (UiTM)
Azri Rahimi - Postgraduate Researcher - Universiti Teknologi MARA (UiTM)

This research deals with the application of the numerical simulation for analyzing the defects in investment casting process. Upon visual inspection of the preliminary casting design of component as vehicle barrier support, it has been discovered that shrinkage porosity is often present. The component is made of austenitic stainless steel SS304 with gravity pouring process. The simulation starts with creation of the CAD model of the product using CATIA. The actual location of shrinkage porosity is compared with the numerical ... Read More

14:05 ET | 11:05 PST

Effectiveness of Altair Inspire Cast Simulation Software for Development of Thin-Walled Stainless Steel Investment Castings, Primarily Used In Valve Industry.

Ravi Karjatkar - Technical Director, Linit Exports Private Limited - Foundry Division, India

Main objectives of this technical study are to reduce the lead time in production of leak proof and defect free investment castings, and at the same time saving significant cost by avoiding multiple real life casting trials.

This paper describes the effectiveness of Altair Inspire Cast simulation software in prediction of the critical investment casting defects.

The key focus of this paper is on estimating and correlating casting soundness and defects seen in software simulation and those observed on real ... Read More

16:25 JST | 15:25 MYT | 12:55 IST

Demonstration

Inspire Form: Hariharasudhan Palaniswamy – Senior Program Manager – Altair

Inspire Cast: Martin Solina – Vice President, Inspire Manufacturing Solutions – Altair

16:35 JST | 15:35 MYT | 13:05 IST

Live Q&A

16:45 JST | 15:45 MYT | 13:10 IST

Workshop: Using Simulation-Driven Design from Concept Development to Final Design

Ujwal Patnaik - Director, Product Strategy - Altair

17:05 JST | 16:05 MYT | 13:30 IST

Live Q&A & Wrap-Up

11:00 CET | 10:00 BST

Welcome & Introduction Altair

Pavan Kumar - SVP, Global Indirect Business - Altair

11:05 CET | 10:05 BST

Altair Keynote - Simulation at the Speed of Design

Ravi Kunju - Chief Product and Strategy Officer - Altair

11:20 CET | 10:20 BST

Simulation's Role in Developing the Lightweight, All Titanium Brompton

Yan Pugh-Jones - Engineering Director - Brompton Bicycle
Steven Harry - Lead Structural Engineer - Brompton Bicycle

11:35 CET | 10:35 BST

FireChat: SMB's Challenges to Adopting Simulation-Driven Design

Michael Larner - Research Director - ABI Research

Moderator: Ujwal Patnaik – Director, Product Strategy – Altair

11:55 CET | 10:55 BST

Live Q&A

Simulation Starters - Everyone Can Simulate

A session designed for those who do not currently use simulation technologies, are outsourcing most/all of their analysis, or still use limited CAD embedded simulation tools. Here you can understand the benefits of the technologies from companies that have recently implemented simulation using Altair SimSolid; and through interactive sessions, experience how easy it is to get started, even with limited resources or on the Cloud

11:05 CET | 11:05 BST

Session Introduction

Wasim Younis - Simulation Manager - Symetri, UK

12:10 CET | 11:10 BST

Expert Chat: SimSolid Cloud - Simulate Anywhere

Girish Mudigonda - Product Manager, SimSolid - Altair

Moderator: Warren Dias – Director of Global OptiStruct Business Development – Altair

12:20 CET | 11:20 BST

Accelerate Underrun Bar and Chassis Design and Development

Mohamadreza Jenaban - Principal Technical Engineer - SDC Trailer, UK

  • SimSolid has enabled us to work on production models.
  • SimSolid has enabled us to design to strict VCA guidelines.
  • SimSolid has enabled us to increase our technical competence across a wider team
12:35 CET | 11:35 BST

Exhaust System Cold end Hanger rod and Muffler Shell Stiffness Analysis using SimSolid

Suresh N - Deputy Manager - FEA & R&D for Structural Durability Simulation - Sharda Motor Industries Ltd. R&D, India

Exhaust system suppliers are continuously improving and adopting advanced simulation techniques and quick testing proceduresfor exhaust system optimization to address time to market, faster vehicle launch and first time and all time right strategy to comply performance and durability. This paper deals with the methodology development of Exhaust system Cold end hanger rod and Muffler Shell stiffness analysis using Mesh less simulation tool SimSolid. During concept stage, design team will develop the CAD model of whole Cold end system based ... Read More

12:50 CET | 11:50 BST

Demonstration - SimSolid

Simon Zwingert - Technical Consultant - Altair

Lakshmi Machine Works Limited (LMW), ein führender Textilmaschinenhersteller in Indien und einer der drei weltweit, die die gesamte Palette der Spinnereimaschinen herstellen.

Das Vorspannen von Verbindungselementen ist eine im Maschinenbau weit verbreitete Technik, die dazu dient, Teile unter Vorspannung zu montieren. Die Vorspannung sollte weder höher noch niedriger als erforderlich sein. Die Optimierung der Vorspannung ist bei der Montage von Teilen immer eine Herausforderung, da sie zahlreiche Iterationen erfordert. Die Lösung der physikalischen 3D-Modellierung von Verbindungselementen in klassischer FEA-Software ist ... Read More

13:00 CET | 12:00 BST

Live Q&A

Simulation-Driven Design

Learn from other small and medium design and engineering teams how simulation can be applied early in the product development lifecycle, to rapidly accelerate the creation and optimization of structurally efficient parts, systems, and assemblies. Attend this session to see how a simulation-driven design approach, using Altair Inspire, can reduce your development time while saving development and manufacturing costs.

12:05 CET | 11:05 BST

Session Introduction

sT Engineering, Turkey

12:10 CET | 11:10 BST

Expert Chat: Accelerate Simulation-Driven Design with Altair Inspire

Andrew Bartels - Vizepräsident, Programmmanagement - Altair

Moderator: Simone Bonino – VP of Business Development Manufacturing Solutions – Altair

12:20 CET | 11:20 BST

Patient-Specific Implants: Power of Simulation and Design for Improved Patient Outcomes

Marques Felipe - CEO - BioArchitects, Brazil

The healthcare industry is rapidly evolving, and historically, standard-sized prostheses made from various materials such as titanium, steel, and PEEK were the primary implant options for patients. These implants undergo rigorous testing according to the standards of each country to ensure safety and effectiveness in daily activities, such as chewing and walking. However, research suggests that conventional implants may not adapt optimally to different anatomical shapes, which can significantly affect surgical success and patient health.

12:35 CET | 11:35 BST

E-Shifter Ribs Topology Optimisation

Abhishek Thakur - Senior Design Engineer - U-Shin India Private Ltd., India

E-Shifter includes a knob and lever arrangement similar to a conventional gear shifter.While conducting structural analysis, the lever component showed high stress concentration on ribs as compare to the allowable stress. The rib structure needed to be improved and was hence chosen as the optimisation target. With the help of Altair Inspire, we have optimised the design of ribs in a lever of EShifter. The main purpose of this topology optimisation is to achieve a design which satisfies the supplier ... Read More

12:50 CET | 11:50 BST

Demonstration - Inspire

Tony Gray - Technical Director - Altair

  • SMRI, UiTM, Malaysia
  • National Kaohsiung University of Science and Technology (NKUST) – Republic of China
  • U-Shin India Private Ltd, India
13:00 CET | 12:00 BST

Live Q&A

Exploring Multiphysics - How can Design Engineers Simulate like a Pro

Unleash the full power of simulation by exploring the behavior of your products in any possible working condition to maximize performance and improve robustness. Through examples and best practices, find out how Altair SimLab based easy-to-use Multiphysics solutions can inject innovation, and how our unique token-based licensing model makes it highly cost-effective.

13:35 CET | 12:35 BST

Session Introduction

Mika Ketola - Account Manager - CaeTek, Nordic

13:40 CET | 12:40 BST

Expert Chat: Handling Multiphysics Workflows with CAD associativity in Altair SimLab

Guna Krishna - Sr. VP, SimLab development - Altair

Moderator: Ujwal Patnaik – Director, Product Strategy – Altair

13:50 CET | 12:50 BST

The Efficient Meshing of Large Combustion Engines by SimLab

Antti Mäntylä - Senior Expert - Wärtslilä, Finland

Altair SimLab enables the meshing of complex parts and assemblies fast and with high quality. The possibility to automatically generate FEM models from CAD geometry speeds up the simulation of design iterations, enables parametric optimization, and minimizes manual work

14:05 CET | 13:05 BST

Use of SimLab Software To Satisfy Analysis of High-Pressure Clamps In Line With Api 6x

Luke Miller - Design Engineer - Destec Engineering

DESTEC operates within the oil and gas industry where the design and production of all products is heavily controlled by the standards we work to, they govern everything from the formulae used in our calculations to the allowable shape profiles of certain components. Because of this, we must stay in line with the most recent versions of the ASME code and the API Specification so that we may retain a competitive edge.

We are looking to begin designing some of ... Read More

14:20 CET | 13:20 BST

Demonstration - SimLab Use Cases

D V Siddharth - SimLab Specialist, Electronics - Altair

14:30 CET | 13:30 BST

Live Q&A

14:35 CET | 13:35 BST

Workshop: Using Simulation-Driven Design from Concept Development to Final Design

Ujwal Patnaik - Director, Product Strategy - Altair

14:55 CET | 13:55 BST

Live Q&A & Wrap-Up

Manufacturing Simulation - Simulation-Driven Design for Manufacturing

With an SDFM approach, product designers can be confident in their chosen manufacturing method because design flaws can be detected much earlier and corrected before any physical prototyping has to be done. In this session find out how to plan for the manufacturing process & understanding critical parameters, Defects and issues, and challenges. Also, ideas of enhancing your manufacturing process, targeting, improved Yield, optimal energy, lowering wastage, improving tool life, and enhancing production quality for Forming/Stamping and Casting.

13:35 CET | 12:35 BST

Session Introduction

Rob Shropshire - Director - Origin Engineering Solutions, UK

13:40 CET | 12:40 BST

Expert Chat: Simulation Design for Manufacturing

Ravi Kunju - Chief Product and Strategy Officer - Altair

Moderator: Simone Bonino – VP of Business Development Manufacturing Solutions – Altair

13:50 CET | 12:50 BST

Manufacturing Feasibility / Process Simulation with Altair Inspire Form

Gökhan Cetinkaya - CEO - Presskon Engg, Gmbh

In our Presentation, we present a case study of how we integrated FEM simulation into our Workflow. In today’s competitive environment, Tool & Die Design Offices must continuously improve their design and manufacturing processes to stay ahead of the competition. FEM simulation can help design engineers optimize their workflow, reduce costs, and improve product quality.

14:05 CET | 13:05 BST

Benchmark Die Casting Housing - Comparison Simulation - Reality

Rainer Böke - Managing Director - Böke-IE GmbH & Co. KG

Benchmark Die Casting Housing – Comparison Simulation – Reality

In our benchmark, together with the companies Sydow Druckguss GmbH and APS Wenden we show casting defects and expected problem areas and compare them with X-ray and sectional images. The results show how close we are to the actual results with our predictions from the FEM simulation.

On-Demand Presentations

  • Skaigh Engineering – UK

Improving Method Development with Casting Simulation

Mike Harper - Director - Skaigh Engineering

Casting companies are under constant pressure to do things quicker at a reduced cost. Casting Simulation provides an ability to speed up method development, reduce physical try-outs and spot defects early in order to cut down on waste and improve yields. The session will feature case studies from Skaigh Engineering, demonstrating how they have implemented Inspire Cast to solve real-world production challenges, saving both time cost.

14:20 CET | 13:20 BST

Demonstration

Inspire Form: Hariharasudhan Palaniswamy – Senior Program Manager – Altair
Inspire Cast: Martin Solina – Vice President, Inspire Manufacturing Solutions – Altair

14:30 CET | 13:30 BST

Live Q&A

14:35 CET | 13:35 BST

Workshop: Using Simulation-Driven Design from Concept Development to Final Design

Ujwal Patnaik - Director, Product Strategy - Altair

14:55 CET | 13:55 BST

Live Q&A & Wrap-Up

11:00 ET | 08:00 PST

Welcome & Introduction Altair

Pavan Kumar - SVP, Global Indirect Business - Altair

11:05 ET | 08:05 PST

Altair Keynote - Simulation at the Speed of Design

Ravi Kunju - Chief Product and Strategy Officer - Altair

11:20 ET | 08:20 PST

Simulation's Role in Developing the Lightweight, All Titanium Brompton

Yan Pugh-Jones - Engineering Director - Brompton Bicycle
Steven Harry - Lead Structural Engineer - Brompton Bicycle

11:35 ET | 08:35 PST

FireChat: SMB's Challenges to Adopting Simulation-Driven Design

Michael Larner - Research Director - ABI Research

Moderator: Ujwal Patnaik – Director, Product Strategy – Altair

11:55 ET | 08:55 PST

Live Q&A

Simulation Starters Everyone Can Simulate!

A session designed for those who do not currently use simulation technologies, are outsourcing most/all of their analysis, or still use limited CAD embedded simulation tools. Here you can understand the benefits of the technologies from companies that have recently implemented simulation using Altair SimSolid; and through interactive sessions, experience how easy it is to get started, even with limited resources or on the Cloud

12:00 ET | 09:00 PST

Session Introduction

Tyler Haggin - COO, TrueInsight - USA.

12:05 ET | 09:05 PST

Expert Chat: SimSolid Cloud - Simulate Anywhere

Girish Mudigonda - Product Manager, SimSolid - Altair

Moderator: Warren Dias – Director of Global OptiStruct Business Development – Altair

12:15 ET | 09:15 PST

Highway Trailer Pneumatic Suspension Bracket Development Using Test Data and Meshless Simulation Technology

Bruno Mollon - Engineer - Suspensys, Brazil

The work developed introduces a new product development cycle and applies this new concept to a pneumatic suspension bracket. The new workflow includes the use of meshless technology in the concept definition phase of the design and the use of the finite element method to validate the final version of the design. The workflow was expanded to include the usage of test data to define realistic load cases to correctly dimensioning of the component to accommodate the project criterions. In ... Read More

12:30 ET | 09:30 PST

Multi Stage Separation Structural Analysis using Altair SimSolid

Shreesha M - Propulsion Engineer - Skyroot Aerospace, India

Rocket stage separation is one of the critical aspects of rocket operation. Successful stage separation is ensured by accuracy in design and timing. An intricate mechanism is realized on par with our rocket stage specification. In search of a tool to analyze this design, we crossed paths with ALTAIR SIMSOLID.
To ascertain separation mechanism design, the model consisting of multiple components has to be analyzed for both, static and dynamic behaviors. The mechanism has a great ... Read More
12:45 ET | 09:45 PST

Demonstration - SimSolid

Simon Zwingert - Technical Consultant - Altair

  • LMW, India
  • Sharda Motors, India
  • Skyroot Aerospace, India
12:55 ET | 09:55 PST

Live Q&A

Simulation-Driven Design

Learn from other small and medium design and engineering teams how simulation can be applied early in the product development lifecycle, to rapidly accelerate the creation and optimization of structurally efficient parts, systems, and assemblies. Attend this session to see how a simulation-driven design approach, using Altair Inspire, can reduce your development time while saving development and manufacturing costs.

12:00 ET | 09:00 PST

Session Introduction

Valmir Fleischman - Director of Operations, VirtualCAE - Brazil

12:05 ET | 09:05 PST

Expert Chat: Accelerate Simulation-Driven Design with Altair Inspire

Andrew Bartels - Vizepräsident, Programmmanagement - Altair

Moderator: Simone Bonino – VP of Business Development Manufacturing Solutions – Altair

12:15 ET | 09:15 PST

Patient-Specific Implants: Power of Simulation and Design for Improved Patient Outcomes

Marques Felipe - CEO - BioArchitects, Brazil

The healthcare industry is rapidly evolving, and historically, standard-sized prostheses made from various materials such as titanium, steel, and PEEK were the primary implant options for patients. These implants undergo rigorous testing according to the standards of each country to ensure safety and effectiveness in daily activities, such as chewing and walking. However, research suggests that conventional implants may not adapt optimally to different anatomical shapes, which can significantly affect surgical success and patient health.

Recent technological advancements and their ... Read More

12:30 ET | 09:30 PST

E-Shifter Ribs Topology Optimisation

Abhishek Thakur - Senior Design Engineer - U-Shin India Private Ltd. India

E-Shifter includes a knob and lever arrangement similar to a conventional gear shifter.While conducting structural analysis, the lever component showed high stress concentration on ribs as compare to the allowable stress. The rib structure needed to be improved and was hence chosen as the optimisation target. With the help of Altair Inspire, we have optimised the design of ribs in a lever of EShifter. The main purpose of this topology optimisation is to achieve a design which satisfies the supplier ... Read More

12:45 ET | 09:45 PST

Demonstration - Inspire

Tony Gray - Technical Director - Altair

  • SMRI, UiTM, Malaysia
  • National Kaohsiung University of Science and Technology (NKUST) – Republic of China
  • U-Shin India Private Ltd, India
12:55 ET | 09:55 PST

Live Q&A

Exploring Multiphysics - How can Design Engineers Simulate like a Pro

Unleash the full power of simulation by exploring the behavior of your products in any possible working condition to maximize performance and improve robustness. Through examples and best practices, find out how Altair Simlab-based easy-to-use Multiphysics solutions can inject innovation, and how our unique token-based licensing model makes it highly cost-effective.

13:05 ET | 10:05 PST

Session Introduction

Esteban Foronda - Application Engineer, - Corpoeco, Colombia

13:10 ET | 10:10 PST

Expert Chat: Handling Multiphysics Workflows with CAD associativity in Altair SimLab

Guna Krishna - Sr. Vice President, SimLab Development - Altair

Moderator: Ujwal Patnaik – Director, Product Strategy – Altair

13:20 ET | 10:20 PST

Predicting Product Quality Better and Faster with Altair SimLab

William Villers - CTO - TEN TECH AEROSPACE AND DEFENSE

TEN TECH AEROSPACE & DEFENSE, INC. provides multi-discipline engineering services including high-end mechanical engineering design, analysis, physical testing support and hardware prototyping services.
Because speed and accuracy are top priorities, we selected Altair® SimLab® for its intuitive interface that allows users to stay in the same tool for the entire process from meshing and setup to solving and visualization. Since we have historically have worked with large designs, where more than 200 million elements are common, we needed a ... Read More

13:35 ET | 10:35 PST

The Efficient Meshing of Large Combustion Engines by SimLab

Antti Mäntylä - Senior Expert - Wärtslilä, Finland

13:50 ET | 10:50 PST

Demonstration - SimLab Use Cases

D V Siddharth - SimLab Specialist, Electronics - Altair

14:00 ET | 11:00 PST

Live Q&A

14:05 ET | 11:05 PST

Workshop: Using Simulation-Driven Design from Concept Development to Final Design

Ujwal Patnaik - Director, Product Strategy - Altair

14:25 ET | 11:25 PST

Live Q&A & Wrap-Up

Simulation-Driven Design for Manufacturing

With an SDFM approach, product designers can be confident in their chosen manufacturing method because design flaws can be detected much earlier and corrected before any physical prototyping has to be done. In this session find out how to plan for the manufacturing process & understanding critical parameters, Defects and issues, and challenges. Also, ideas of enhancing your manufacturing process, targeting, improved Yield, optimal energy, lowering wastage, improving tool life, and enhancing product quality for Forming/Stamping and Casting.

13:05 ET | 10:05 PST

Session Introduction

Syed Ali - Application Engineer - FutureScape - Canada

13:10 ET | 10:10 PST

Expert Chat: Simulation Design for Manufacturing

Ravi Kunju - Chief Product and Strategy Officer - Altair

Moderator: Simone Bonino – VP of Business Development Manufacturing Solutions – Altair

13:20 ET | 10:20 PST

Manufacture High-Quality Metal Formed Parts First Time with Simulation

Jay Weiner - Founder - BiggerBoat Solutions, Canada

Metal formed parts must meet rigorous quality, safety, and performance standards. To achieve this, companies typically conduct physical tests or try-outs, which can often be expensive and time-consuming. If the part has defects, it needs to be re-designed, resulting in lost tooling costs and wasted material.

With decades of experience in tool and die design and manufacturing, Jay Weiner, founder and forming specialist at BiggerBoat Solutions Ltd. in Ontario, Canada, will share some insights on how using Altair solutions has ... Read More

13:35 ET | 10:35 PST

Improving Method Development with Casting Simulation

Mike Harper - Director - Skaigh Engineering

Casting companies are under constant pressure to do things quicker at a reduced cost. Casting Simulation provides an ability to speed up method development, reduce physical try-outs and spot defects early in order to cut down on waste and improve yields. The session will feature case studies from Skaigh Engineering, demonstrating how they have implemented Inspire Cast to solve real-world production challenges, saving both time cost.

13:50 ET | 10:50 PST

Demonstration

Inspire Form: Hariharasudhan Palaniswamy – Senior Program Manager – Altair
Inspire Cast: Martin Solina – Vice President, Inspire Manufacturing Solutions – Altair

14:00 ET | 11:00 PST

Live Q&A

14:05 ET | 11:05 PST

Workshop: Using Simulation-Driven Design From Concept Development to Final Design

Ujwal Patnaik - Director, Product Strategy - Altair

14:25 ET | 11:25 PST

Live Q&A & Wrap-Up

Ujwal Patnaik - Director, Product Strategy - Altair

Events Sponsors

PLATINUM

GOLD

Silver

Bronze